Non-Sloping Control Panel Enclosures.
This range of control panel enclosures are precision laser cut from six pieces of 4mm MDF and a 3mm plywood front panel. Similar to our popular range of sloping front panels these are non sloping flat face. Once assembled they are both smart and sturdy. The control panel enclosure arrives flat packed and requires PVA wood glue or similar to assemble (not supplied).
The separate removable front panel is simply attached to the control panel using M3 screws (supplied) which screw into brass M3 inserts (supplied fitted) in the body of the control panel enclosure.
The control panel is currently available in five foot print sizes:-
240mm x 100mm option.
240mm x 150mm option.
400mm x 100mm option.
400mm x 150mm option.
400mm x 250mm option.
The assembled internal depth is 36mm for a distance of 10mm from each edge owing to the supporting frame and 40mm generally across the panel. Once the panel is added the external height is 43mm not including the fastening screw heads. The 400mm x 250mm has a 6mm MDF base for increased rigidity, so the external height of this option is 45mm.
We are open to discussion around bespoke requests for specific designs, sizes or cut out positions along with bespoke panel engraving. Additional services would attract an additional charge which is dependent on the amount of work involved in modifying the original design.
Engraving and switch layout, lettering etc
If an engraved Non-Sloping Control Panel is desired with custom cutouts, logo, trackplan/ diagrams, please contact us by eBay message to work through your requirements. Wood engraving is carried out on a 3mm plywood front panel using a premier high definition laser machine. Preferrrably your desired front panel layout should be sent as a jpg, png, cdr or pdf document. We will convert your design to a vector drawing and send you a draft in pdf format to agree. Inevitably this process may mean getting your design right may take a little longer but we will endeavour to expedite the design phase as soon as possible. See this video for an example of a custom panel being manufactured https://fb.watch/6aRkEar0rp/
The Acrylic sheet used is made of a thick clear top layer and a thin white bottom layer which is engraved with the desired pattern. We do not supply painted/ infilled front panels. However, the engraving can be simply painted or infilled with different colour acrylic paints to highlight text or areas when viewed from the front. If a flush appearance is desired as recently seen then please enquire using an ebay contact message.
Unless otherwise requested we will despatch via 2nd Class Royal Mail (small parcel), we reserve the right to elect an alternative courier as necessary.